+86 371 55057610

inquiry@xsteelplate.com

  • SS330
  • SS330

SS330

  • Steel Standard: JIS G3101
  • Rolling Type: Mild steel plate,Carbon steel coil
  • Thickness: 2mm-650mm
  • Width: 1000mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: As rolled/Control-rolled/Normalised
(※ Click this button to inquiry)
■ Overview
Under Janpan steel standard JIS G3101,there are carbon steel grades ss330,ss400,ss490 and ss540.For carbon steel plate SS330,when rolling the yield strength shall be above 205 Mpa for the thickness equal or below 16 millimeters,for the thickness between 16 and 40mm,the yield strength value shall above 195 Mpa.The tensile strength of common structural steel plate SS330 is within 330-430 Mpa.Xinsteel owned ten thousands tons jis g3101 ss330 in our stock warehouses with the thickness from 2mm to 300mm.
 
■ Full Data
Technical Requirements & Additional Services:
♦ High tension test
♦ Low temperature impacting test
♦ Simulated post-welded heat treatment (PWHT)
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
♦ Rolling under ASTM A6/A6M for Genenal requirements of structural used steel
 
■ Techicals
Mechnical property for SS330 mild steel:

Thickness (mm)
SS330 ≤ 16 > 16 ≤ 40 > 40 ≤ 100 > 100
Yield strength (≥Mpa) 205 195 175 165
Tensile strength (Mpa) 330-430

Chemical composition for SS330 carbon steel (Heat Analysis Max%)

Main chemical elements composition of SS330
C Mn P S Other alloy elements may added
- - 0.050 0.050
Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :