+86 371 55057610

inquiry@xsteelplate.com

  • P355ML2 PLATE
  • P355ML2 STEEL

P355ML2

  • Steel Standard: EN 10028-5
  • Rolling Type: Pressure vessel steel plate,Boiler steel plate
  • Thickness: 6mm-350mm
  • Width: 1500mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: TMCP
(※ Click this button to inquiry)
■ Overview
Boiler steel sheet P355ML1,low temperature impacting test have to be done at minus 40 ℃.Pressure vessel and boiler steel plates P355ML2 shall be done heat treatment under Thermomechanically rolled when rolling.This treatment offer good cold forming and hot forming properities without negatively affecting the material properties.So these steel P355ML2 is therefore also suitable for cold-bordering and cold-flanging as well as for cold-bending and cold-folding.
■ Full Data
Technical Requirements & Additional Services:
♦ High tension test
♦ Low temperature impacting test
♦ Simulated post-welded heat treatment (PWHT)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 
■ Techicals
Mechnical property for P355ML2 pressure vessel steel:

Thickness(mm) Yield strength (≥Mpa) Tensile strength (Mpa) Elongation in ≥,%
T≤16 355 450-610 22
16<T≤40 355
40<T 345

Chemical composition for P355ML2 pressure vessel steel (Heat Analysis Max%)

Main chemical elements composition of P355ML2
C Si Mn P S Al (total) N
0.14 0.50 1.60 0.020 0.015 ≥0.020 0.015
Mo Nb Ni Ti V Cr+Cu+Mo
0.20 0.05 0.50 0.05 0.10 0.60
Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :