+86 371 55057610

inquiry@xsteelplate.com

  • S275ML
  • S275ML

S275ML

  • Steel Standard: EN 10025-4
  • Rolling Type: Structural steel plate,low alloy steel plate
  • Thickness: 6mm-500mm
  • Width: 1500mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: Thermo-Mechanical Control Process (TMCP)
(※ Click this button to inquiry)
■ Overview
Structural steel plate S275ML is mainly used for steel frames,steel constructions,railways and mechine parts which would be in low temperature.S275ML steel plate have to be done low temperature impacting test under minus 50 centi degree.Comparing with EN 10025-4 s275m which shall be done impacting test under minus 20 centigree.When rolling steel plate S275ML, the P and S contents can be 0.005% higher than the below table values. For railway applications a maximum S content of 0,012 % may be agreed at the time of enquiry and order.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
■ Techicals

Mechnical property for S275ML Structural steel:

Thickness (mm)
S275ML ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100
Yield strength (≥Mpa) 275 265 255 245 245 240
  ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100
Tensile strength (Mpa) 370-530 360-520 350-510 350-510 350-510

Chemical composition for S275ML Structural steel (Heat Analysis Max%)

Main chemical elements composition of S275ML
C Si Mn P S Nb V
0.13 0.50 1.50 0.025 0.020 0.05 0.08
Al(total) Ti Cr Ni Mo Cu N
≥0.02 0.05 0.30 0.30 0.10 0.55 0.015

Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :