+86 371 55057610

inquiry@xsteelplate.com

  • S275
  • S275N

S275N

  • Steel Standard: EN 10025-3
  • Rolling Type: Structural steel plate,low alloy steel plate
  • Thickness: 6mm-500mm
  • Width: 1500mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: Normalised
(※ Click this button to inquiry)
■ Overview
Normalised steel plate S275N is a kind weldable fine grain structural steel which shall be under normalized or normalized rolled delivery condition.Generally The steel grades in EN 10025-3,S275N,S275NL,S355N and S355NL shall be classified as non-alloy quality steels,and S420N,S420NL,S460N and S460NL shall be classified as alloy special steels according to EN 10020.For the name of S275N steel plate,S is for structural steel,275 is the minimum yield strength value for S275N when rolling,L is for low temperature impacting test under minus 20 centigrade. 
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 
■ Techicals
► Mechnical property for S275N Structural steel:

Thickness (mm)
S275N ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100 ≤ 150 > 150 ≤ 200 > 200
Yield strength (≥Mpa) 275 265 255 245 235 225 215 205
  ≤ 100 > 100 ≤ 200 > 200
Tensile strength (Mpa) 370-510 350-480 350-480

Chemical composition for S275N Structural steel (Heat Analysis Max%)

Main chemical elements composition of S275N
C Si Mn P S Nb V
0.18 0.40 0.50-1.50 0.030 0.025 0.05 0.05
Al(total) Ti Cr Ni Mo Cu N
≥0.02 0.05 0.30 0.30 0.10 0.55 0.015
Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :