+86 371 55057610

inquiry@xsteelplate.com

  • S235J2
  • S235J2

S235J2

  • Steel Standard: EN 10025-2
  • Rolling Type: Mild steel plate,Carbon steel coil
  • Thickness: 2mm-650mm
  • Width: 1000mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: As rolled/Control-rolled/Normalised
(※ Click this button to inquiry)
■ Overview
Low temperature impacting test shall be done for structural steel plate S235J2 under minus 20 centigrade.When rolling of steel plate S235J2,As rolled or Normalizing rolling is both ok.As rolled delivery condition without any special rolling and heat treatment condition.Normalizing rolling process in which the final deformation is carried out in a certain temperature range leading to a material condition equivalent to that obtained after normalizing so that the specified values of the mechanical properties are retained even after noamalizing.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 
■ Techicals

Mechnical property for S235J2 carbon steel:

Thickness (mm)
S235J2 ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100 ≤ 150 > 150 ≤ 200 > 200 ≤ 250 > 250
Yield strength (≥Mpa) 235 225 215 215 215 195 185 175 165
  < 3 ≥ 3 ≤ 100 > 100 ≤ 150 > 150 ≤ 250 > 250
Tensile strength (Mpa) 360-510 360-510 350-500 340-490 330-480

Chemical composition for S235J2 mild steel (Ladle Analysis Max%)

Main chemical elements composition of S235J2
Thickness(mm) C Si Mn P S N Cu
T≤16 0.17 ... 1.40 0.025 0.025 ... 0.55
16<T≤40 0.17
40<T 0.17

Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :