+86 371 55057610

inquiry@xsteelplate.com

  • S235J0
  • S235J0

S235J0

  • Steel Standard: EN 10025-2
  • Rolling Type: Mild steel plate,Carbon steel coil
  • Thickness: 2mm-650mm
  • Width: 1000mm-4200mm
  • Length: 3000mm-18000mm
  • Heat Treatment: As rolled/Control-rolled/Normalised
(※ Click this button to inquiry)
■ Overview
Common carbon structural steel plate S235J0 rolling with the minimum yield strength at 235Mpa,and the tensile strength shall be within 360-510 Mpa.Low temperature impacting test shall be done under zero centigrade for structural steel plate S235J0.Normally Controlled rolled or Air rolled for steel plate S235J0 is ok,if customer demand,normalized is better for delivery of S235J0 steel plates.Xinsteel roll S235J0 completely according to standard EN 10025-2 and issued the original mill test certificate under Type EN 10204 3.1.
■ Full Data
Technical Requirements & Additional Services:
♦ Low temperature impacting test
♦ Rolling under standard NACE MR-0175 (HIC+SSCC)
♦ Ultrasonic test under EN 10160,ASTM A435,A577,A578
♦ Issued Orginal Mill test certificate under EN 10204 FORMAT 3.1/3.2
♦ Shot blasting and Painting,Cutting and welding as per end user’s demands
 
■ Techicals

Mechnical property for S235J0 carbon steel:

Thickness (mm)
S235J0 ≤ 16 > 16 ≤ 40 > 40 ≤ 63 > 63 ≤ 80 > 80 ≤ 100 > 100 ≤ 150 > 150 ≤ 200 > 200 ≤ 250 > 250
Yield strength (≥Mpa) 235 225 215 215 215 195 185 175 175
  < 3 ≥ 3 ≤ 100 > 100 ≤ 150 > 150 ≤ 250 > 250
Tensile strength (Mpa) 360-510 360-510 350-500 340-490 340-490

Chemical composition for S235J0 mild steel (Ladle Analysis Max%)

Main chemical elements composition of S235J0
Thickness(mm) C Si Mn P S N Cu
T≤16 0.17 ... 1.40 0.030 0.030 0.012 0.55
16<T≤40 0.17
40<T 0.17

Inquiry >>
Your name :
Your tel :
* Your mail :
Your company :
Your country :
* Inquiry :